Saving And Loading Of Programs; Loading Programs Into The Control - Duerkopp Adler 910 Operating Instructions Manual

8.8

Saving and loading of programs

8.8.1

Loading programs into the control

58
–
Switch the sewing unit off.
–
Plug the dongle 1 in the control.
–
Switch the sewing unit on again.
–
Press key "P".
The following display appears:
–
Select Load with the keys "ñ " or "ò ".
–
Press the "OK " key.
The programs saved on the dongle are indicated.
1
The figure "1" after the
loading program means
that more than one
page is available!