8.7.4
Submenu Positions
54
Via this menu item the thread clamp and the trimming speed are set.
Pos.FK auf (Position thread clamp open)
Time when the thread clamp opens.
Input: 0 ... 359
Pos.FK zu (Position thread clamp closed)
Time when the thread clamp closes.
Input: 0 ... 359
Pos.FS red (Position thread tension reduced)
Time when the thread tension is reduced.
Input: 0 ... 359
FA-Drehzahl (Thread cutting speed)
Input of the sewing motor speed when trimming the thread.
Input: 100 ... 400 [R/min]
Pos.FK zu (Position thread clamp closed)
Time when the thread clamp closes
after sewing. (in conjunction with the thread pulling
device).
Input: 0 ... 359