Duerkopp Adler 910 Operating Instructions Manual page 42

40
Date/Time
Via this menu item the date and the time are set.
Additional functions
Via this menu item the operational additional functions
can be set.
Input:
Pedal
Input:
0 = Foot switch
1 = Push button
Submenu Corrections
Note
The corresponding seam program has to be selected in the main menu
first.
Shifting X
Via this menu item the seam contour is shifted in the
X-direction.
Input:
Shifting Y
Via this menu item the seam contour is shifted in the
Y-direction.
Input:
Factor X
Via this menu item the seam contour is enlarged or scaled
down in the X-direction.
Input:
Factor Y
Via this menu item the seam contour is enlarged or scaled
down in the Y-direction.
Input:
1 ... 99
+/- 0 to 5 mm
+/- 0 to 5 mm
+/- 0 to 20 %
+/- 0 to 20 %