6.
Operation of the rupture-seam visualisation facility
6.1
Access to the system
3
The program is operated by touching the appropriate field on the Touch
Screen Monitor 1.
Access to the program is protected by three security levels (depending
on the security level, not all the fields in the basic screen are
available).
2
1
–
The operator is identified by a magnetic bar code card 4. This
allows all the operator's data, including his security level, to be
stored and directly communicated to the system.
–
The manual scanner 3 is used to scan in – i.e. read into the system
– the yarns that are to be used and the pieces that are to be sewn.
Logging onto the system
–
The operator logs on by wiping his bar code card 4 through the
magnetic-card reader 2.
1
4
21