8.4
Main menu
–
Switch the main switch on.
The control is initialized.
The main menu appears.
–
Select the desired parameter with the keys "ñ " or "ò ".
The symbol of the selected parameter is displayed inversely.
–
Alter the selected parameter as described in chapter 8.3.
Program name
Call the program list (max. 99 programs) using
the "S" key and select one program using the cursor
keys (see 8.3.1).
After confirming by pressing the "OK" key,
the selected sewing program will be displayed.
Speed (RPM)
Via this parameter the desired speed is set.
Input:
Note
The speed is defined in the seam programs.
Via this menu item the speed in the program can
only be reduced. A higher speed
is indicated, but not executed.
Sequences
Selection of the sewing sample sequence
(see submenu "Sequences", page 25).
Input:
Counter
Switches over to the submenu "Counter"
(see submenu "Counter", page 26).
Service menu
Switches over to the service menu
(see "Service menu", page 28).
0 to 2500 R/min
1 (2 .. 8, if available)
1
23