Duerkopp Adler 910 Operating Instructions Manual page 41

Submenu Settings
Note: The submenu "Settings" has two pages.
Start
0 = One clamp
Sewing process
–
Step the pedal = the clamp lowers.
–
Step the pedal = start of the sewing process
1 = One clamp (quick start)
Sewing process
–
Step the pedal = the clamp lowers, the sewing process
starts.
2 = Coninuous operation
–
Step the pedal continuously = continuous cycle.
Language
Via this menu item the language in the control panel is set.
Input:
Thread monitor
Via this menu item the thread monitor is switched on or off.
Input:
Needle cooling
With this menu item the needle cooling is switched on or off.
Input:
Reference cycle
Via this menu item the reference cycle time of the sewing
unit is set.
Input:
The figure "1" after the
setting means
that more than one
page is available!
0 = English
1 = German
0 = off
1 = on
0 = off
1 = on
1 ... 10
1
39