Duerkopp Adler 910 Operating Instructions Manual page 43

Laser/Outputs
Via this menu item the outputs are switched.
Example for program location 4.
First output = laser lamp
Input:
Clamp
Via this menu item the operation of the clamp
for the corresponding sewing program can be set.
–
0 = One clamp
Double clamps (not yet available)
–
1 = lower the right clamp first, then the left one
–
2 = lower the left clamp first, then the right one
–
3 = lower both clamps simultaneously
0 = OFF
1 = ON
1
41