Optional Equipment; Operating The Sewing Unit; Tilting The Machine Head Up - Duerkopp Adler 743-221 Operating Instructions Manual

1.4 Optional Equipment

2. Operating the Sewing Unit

2.1 Tilting the Machine Head Up

1
0794 013222 Bundle clamp with slewing arm and holding pipe.
0794 000091 Placement table (small).
(only in conjunction with the bundle clamp)
0794 000332 Smoother device for smoothing the blown-out
sewing pieces.
(only in conjunction with the bundle clamp)
0794 013333 Blower pipe from above or from the right.
0794 013444
Placement table
(when using in-house bundle clamp carriages)
0797 003031 Compressed air connection hose, coupling plug,
coupling socket and hose nozzle.
The machine head can be tilted up for maintenance work.
Caution Risk of Injury !
Turn the main switch off.
Tilt the machine head up only with the sewing unit turned off.
–
Swing the placement table 1, bundle clamp and smoother to the
side.
–
Bring the form set 3 into the left end position.
–
Carefully tilt the machine head up at the lever 2.
The machine head is held in this position through the location of
the center of gravity.
2
3
5