Submenu Thread Tension - Duerkopp Adler 910 Operating Instructions Manual

8.7.1

Submenu Thread tension

Via this menu item the thread tensions are calibrated.
Kali.1 (calibration)
Setting of the thread tension with closed
thread tension discs.
Factory setting = 120
1
Kali.2 (calibration)
Setting of the thread tension with closed
thread tension discs.
Factory setting = 400
Kali.3 (calibration)
Setting of the thread tension with closed
thread tension discs.
Factory setting = 700
100% value
For reducing the thread tension when the value in the main
menu is at the lowest end already.
Example:
Set the value to 50 % = the thread tension is reduced by
half in the whole setting range.
FS test
Thread tension test for measuring the thread tension.
51