Sewing - Duerkopp Adler 910 Operating Instructions Manual

9.

Sewing

Operating and function sequence when sewing:
Sewing operation
Before the sewing
start
Starting position
Sewing
During the sewing
cycle
Interrupt the
sewing operation
Continue the
sewing operation
Finish the
sewing operation
Operation/ Explanation
- Pedal in resting position
Sewing unit stands idle
Needle and fabric clamp in position "up".
- Feed material
- Step the pedal forward.
The sewing unit works with the set speed.
- Step the pedal back.
The sewing unit stops.
The clamps remain in position "down".
- Step the pedal forward again.
- Step the pedal back again.
1
67