Table of Contents
Advertisement
Operating manual
4 Operating manual
4.1
1. Put the thread reel on the thread stand and guide the needle thread and
2. Thread the needle thread as illustrated in the following figure.
Fig. 1: Threading the needle thread
(1) - Silicone oiler (optional)
3. After threading, pull about 4 cm of the needle thread out through the
4. If you are using silicone oil, additionally thread the needle thread in
Operating manual 512/532 Version 01.0 - 03/2013
Threading the needle thread
CAUTION
Risk of injury due to the needle tip and moving
parts
Only thread the needle thread while the automatic
sewing machine is switched off.
the hook thread through the unwinder arm.
• The unwinder arm must be in a horizontal position above the thread
reels.
2
needle.
This guarantees a safe start to sewing.
through the silicone oiler (1).
1
(2) - Guide
13
Advertisement
Table of Contents
