Inputs
With this test function the input element to be tested is selected.
ATTENTION !
The input elements have been carefully set in the factory.
Setting and correcting must only be done by trained service staff.
Caution: Risk of injury!
Do not reach into the machine when starting and finishing the input
test.
–
Start the test function with the "OK" key.
–
Select the desired input element with the keys "ñ " or "ò ".
The switching status of the input element is indicated.
–
Press the function key "ESC" for quitting the test function.
The menu Multitest is displayed.
Input element
9
25
26
27
Function
Needle thread monitor
Reference switch sewing motor
Reference switch X-motor
Reference switch Y-motor
1
43