Thread Breakage Mode - Duerkopp Adler 910 Operating Instructions Manual
Cnc sewing unit for free seam contours
Hide thumbs
Also See for 910:
- Service instructions manual (46 pages) ,
- Spare parts (36 pages) ,
- Installation instructions manual (34 pages)
Table of Contents
Advertisement
9.1
Thread breakage mode
68
If the needle thread breaks during the sewing process, this is
recognized by the thread monitor 2 and the sewing unit switches into
the thread breakage mode.
1
2
After the thread monitor has responded, the following screen appears:
–
Press switch 1 "Safe stop".
The following screen appears:
–
Thread in the thread.
–
Press the "OK" key.
Advertisement
Table of Contents
