Technician Mode - Duerkopp Adler 910 Operating Instructions Manual

8.7

Technician mode

–
Switch the main switch on.
The control is initialized.
–
Step the pedal back to reach the initial position of the sewing unit.
–
When the main menu is displayed, press the function key "F".
The Multitest menu appears.
–
When the Multitest menu is displayed, press the function key "F".
The following screen appears:
–
Enter the code number "25483" and confirm with "OK".
After entering the correct code number the display changes over to
the menu "Technician mode".
–
Press the "OK" key.
The menu "Technician mode" appears:
–
Select the desired submenu with the keys "ñ " or "ò ".
–
Switch to the selected submenu with the "OK" key.
1
49