Duerkopp Adler 910 Operating Instructions Manual page 29

Bobbin max.
Initial value of the bobbin capacity counter
Input:
If the value is set to "0", the stitch counter is
switched off.
Determining the bobbin capacity
–
Set Bobbin max. to "0".
–
Confirm "bobbin changed".
Current bobbin is set to "0".
–
Press the "ESC" key.
–
Insert full bobbin.
–
Sew until the bobbin is empty.
–
Call up the "counter menu".
–
Read off Current bobbin.
–
Enter a value less a reserve in the field Bobbin max..
Example: - 50 stitches per seam pattern.
Note
Confirm "bobbin changed" after every bobbin change.
Current bobbin
Current bobbin capacity.
Deleting parts
Reset the parts counter
–
Press the "OK" key.
The parts counter is reset to "0".
Parts
Display of the sewn parts.
0 ... 99990
1
27