Table of Contents
Advertisement
Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
5.3
Software operating modes
The software of the 867-M PREMIUM has 3 available operating
modes:
• Manual mode (program 000) ( p. 60)
Manual mode is the simplest operating mode. There are no
programs/seam programs and no inputs for individual seam
sections.
Changes to the sewing foot pressure, stroke height, stitch
length, needle thread tension and, also, the activation of
other functions are always implemented immediately.
All the major sewing parameters can be changed manually
during the sewing process.
• Automatic mode (program 001 - 999) ( p. 90)
Automatic mode allows for the execution of setups (seam
program comprised of only one seam section) or complex
seam programs (comprising 2 or more seam sections).
Seam programs are divided into individual seam sections.
Each section is assigned its own individual stitch length,
needle thread tension, etc.
• Programming/Edit mode ( p. 94)
Programming mode allows the operator to create a new
seam program in a quick and easy manner.
Edit mode can be used to adjust, delete and copy seam
programs.
The individual modes and their uses are explained in detail later on.
59
Advertisement
Table of Contents
