Auto Uni-D Adjustment - Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual

EPSON Stylus Pro 3800/3800C/3850

5.3.16 Auto Uni-D Adjustment

† Purpose
Carries out an automatic Uni-directional alignment adjustment using the ink mark
sensor.
† Paper Used
„
Size: A4
„
Type: Economy SuperFine Paper
† Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Auto Uni-D Adjustment].
3. Click [Run] to print the adjustment pattern.
When the pattern is printed, the printer automatically starts to scan the pattern and
performs the corrections. (No manual adjustment is required.)
4. Click [Finish].
Figure 5-63. [Auto Uni-D Adjustment] Screen
ADJUSTMENT
Uni-D VSDX, PGXXX
M = XXX, C = XXX, Pk/Mk = XXX, Y = XXX, LLk = XXX, Lk = XXX, Lc = XXX, Lm = XXX
Sheet 1
Standard Adjustment
Uni-D VSDX, PGXXX
M = XXX, C = XXX, Pk/Mk = XXX, Y = XXX, LLk = XXX, Lk = XXX, Lc = XXX, Lm = XXX
VSDX M, C, Bk, Y, LLk, Lk, Lc, Lm ( 0 >> XXX )
[ Dot miss-alignment Vertical ]
Sheet 2
Figure 5-64. Adjustment Pattern
Revision A
Auto-Unid_01
234