EPSON Stylus Pro 3800/3800C/3850
4.3.9.2 COVER, CR
1.
Remove the HOUSING, UPPER.
2.
Remove the two screws that secure the COVER, CR and remove it.
One C.B.P. 3 x 6 screw (9 ± 1 kgf.cm)
One C.B.S. 3 x 6 screw (9 ± 1 kgf.cm)
The following are important points when installing the COVER,
CR.
Before screwing the unit, make sure that the cables are not
trapped.
As different types of screws are used, make sure to reinstall the
correct type of screws at the correct positions.
DISASSEMBLY & ASSEMBLY
(p106)
Disassembly/Assembly Procedure (Group 1)
Overhead view
C.B.P. 3x6
Figure 4-79. Removing the COVER, CR
Revision A
COVER, CR
C.B.S. 3x6
150