Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 125

EPSON Stylus Pro 3800/3800C/3850
4. Release the cables of the LOCK, COVER, ASSY. from the two cable hooks.
See Figure 4-47.
5. Pull out the BASE, ENCLOSURE.
6. Release CN44 and CN51 connectors of the LOCK, COVER, ASSY. on the
BOARD ASSY., MAIN. See Figure 4-29.
7. Peel off the acetate tapes on the COVER, ENCLOSURE, ASSY. to release the
cables of the LOCK, COVER, ASSY., and remove the LOCK, COVER, ASSY.
See Figure 4-48.
Route the cables of the LOCK, COVER, ASSY., with other cables
and secure them with the acetate tapes as shown in
DISASSEMBLY & ASSEMBLY
(p110)
Figure
Disassembly/Assembly Procedure (Group 1)
Left rear side of the printer
4-48.
Figure 4-47. Releasing the LOCK, COVER, ASSY. Cables (1)
Left rear side of the printer
COVER, ENCLOSURE, ASSY.
Figure 4-48. Releasing the LOCK, COVER, ASSY. Cables (2)
Revision A
cable hooks
acetate tapes
125