Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 70

EPSON Stylus Pro 3800/3800C/3850
Message on LCD
FRONT FEED SLOT OPEN
The release roller is locked because the Board Paper Tray (front feed slot) has
PRESS THE
been held open for longer than a predetermined time period.
DOWN
BUTTON
AND REMOVE
PAPER
FRONT FEED SLOT OPEN
The Board Paper Tray (front feed slot) was opened when it should not be
CLOSE THE
opened.
FRONT MANUAL
„
FEED SLOT
„
„
FRONT FEED SLOT OPEN
The Board Paper Tray (front feed slot) was opened when the printer became
LOAD
ready for printing.
MEDIA AND
PRESS THE
DOWN BUTTON
FRONT SLOT CLOSED
The Board Paper Tray (front feed slot) is closed when the tray is selected as the
OPEN THE
paper source.
FRONT MANUAL
The Board Paper Tray Open sensor is not connected.
FEED SLOT
The Board Paper Tray Open sensor is broken.
FRONT SLOT CLOSED
The Board Paper Tray (front feed slot) is closed, but the PE sensor is detecting
OPEN THE
paper.
FRONT MANUAL
The Board Paper Tray Open sensor is not connected.
FEED SLOT
The Board Paper Tray Open sensor is broken.
NO INK CARTRIDGE
The printer cannot recognize the ink cartridge.
INSTALL INK CARTRIDGE
INK CARTRIDGE ERROR
The printer cannot read/write data from/into the CSIC correctly.
REPLACE CARTRIDGE
INK CARTRIDGE
The installed ink cartridge is not the EPSON genuine cartridge.
PLEASE USE GENUINE
EPSON INK CARTRIDGE
TROUBLE SHOOTING
Description
The tray was opened after feeding paper from the rear manual tray using the
operation panel.
The tray was open when paper feeding from the ASF was started.
The tray was opened before the power-on initialization sequence is finished.
Remedies for Error Messages
Remedy
„
Press the Paper Feed/Down button to unlock the release roller.
„
When no paper has been loaded on the tray, close the tray.
Close the Board Paper Tray (front feed slot).
Load paper on the Board Paper Tray (front feed slot), and press the Paper
Feed/Down button.
Open the Board Paper Tray (front feed slot).
Check the connection between the sensor and the main board, and fix any
abnormality.
Replace the sensor.
Open the Board Paper Tray (front feed slot).
Check the connection between the sensor and the main board and fix any
abnormality.
Replace the sensor with a new one.
Install an ink cartridge. If already installed, remove and reinstall it.
Replace the ink cartridge.
Check the connection between the CSIC and the main board, and fix any
abnormality.
Replace the ink cartridge.
Replace the ink cartridge with an EPSON genuine one.
Revision A
70