Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 27

EPSON Stylus Pro 3800/3800C/3850
† PG settings list
The table below lists the platen gap amounts settable with the printer driver, control
panel, and media table.
Table 1-10. PG Setting List
Printer Driver
Control Panel
Paper Thickness
Setting
setting
NARROW
STANDARD
No setting
WIDE
0.0 to 0.8mm
WIDER
WIDEST
0.9mm to 1.5mm --
PRODUCT DESCRIPTION
Media Table or
Printer Driver PG amount (mm)
PG Setting
Minimum 0.9
Small 0.9
Middle 1.2
Large 1.5
Minimum 0.9
Small 1.2
Middle 1.5
Large 2.1
Minimum 1.2
Small 1.5
Middle 2.1
Large 2.1
Minimum 1.5
Small 2.1
Middle 2.1
Large 2.1
Minimum 2.1
Small 2.1
Middle 2.1
Large 2.1
-- 3.5
† Firmware version indication
The table below explains the meaning of the "o0XXXX-xx.xx.IBC" (firmware
version).
Table 1-11. Firmware Version Indication
Item
A code assigned to each printer.
o0
Special version is assigned to "0" (zero).
XXXX The version of the firmware installed on the printer.
xx.xx The version of the network firmware.
A code assigned by product. The code of the printer is "8".
I
When the business system functions are enabled, the printer settings are
indicated in hexadecimal (1 to F).
bit0: Graphic printing control function.
B
bit1: Credit function
bit2: Credit counter
bit3: Reserved
Shows the custom number when the custom operation has been set using
C
the special setting menu. "0" appears when such operation is not set.
Operation Panel
Explanation
0: Disabled
1: Enabled
0: Disabled
0: The credit function is disabled or the counter is "0" (zero).
1:The credit function is enabled and the counter is 1 or more.
Revision A
27