EPSON Stylus Pro 3800/3800C/3850
4.3.3.3 HOUSING, FRONT, LEFT
1.
Open the STACKER, C.
2.
Remove the screw that secures the HOUSING, FRONT, LEFT to the main unit.
One C.B.P. 3 x 8 screw (6 ± 1 kgf.cm)
3.
Pull the upper part of the HOUSING, FRONT, LEFT toward you to release the
upper rib and the two lower hooks, and remove the HOUSING, FRONT, LEFT.
Be sure to engage the two lower hooks with the cutouts, and align
the positioning socket with the rib on the main unit.
DISASSEMBLY & ASSEMBLY
Disassembly/Assembly Procedure (Group 1)
rib
C.B.P. 3x8
HOUSING, FRONT, LEFT
hooks
Figure 4-9. Removing the HOUSING, FRONT, LEFT
Revision A
STACKER, C
97