Removing The Motor Assemblies - Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual

EPSON Stylus Pro 3800/3800C/3850

4.3.5 Removing the MOTOR ASSEMBLIES.

4.3.5.1 MOTOR ASSY., APG
1. Remove the HOUSING, UPPER.
2. Pull out the BASE, ENCLOSURE.
3. Disconnect CN45 of the MOTOR ASSY., APG on the BOARD ASSY., MAIN.
See Figure 4-29.
4. Release the cables of the MOTOR ASSY., APG from the three cable hooks.
See Figure 4-38.
5. Peel off the acetate tapes on the COVER, ENCLOSURE, ASSY. to release the
cables of the MOTOR ASSY., APG.
Route the cables of the MOTOR ASSY., APG, with other cables
and secure them with the acetate tapes as shown in
DISASSEMBLY & ASSEMBLY
(p106)
(p110)
See Figure 4-39.
Figure
Disassembly/Assembly Procedure (Group 1)
Right rear of the printer
Cable hooks
4-39.
Figure 4-38. Releasing the MOTOR ASSY., APG cables (1)
Right rear of the printer
Figure 4-39. Releasing the MOTOR ASSY., APG cables (2)
Acetate tapes
COVER, ENCLOSURE, ASSY.
Revision A
118