Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 184

EPSON Stylus Pro 3800/3800C/3850
4.4.1.3 ASF SENSOR
1. Remove the HOUSING, UPPER.
2. Remove the ASF, ASSY. (p179)
3. Disengage the two tabs of the FLAG, DETECTOR, ASF on the left side of the
ASF, ASSY. from the inside, and remove the FLAG, DETECTOR, ASF.
Be sure to align the two grooves of the FLAG, DETECTOR, ASF
with the ribs of the LD ROLLER SHAFT to install the FLAG,
DETECTOR, ASF.
FLAG, DETECTOR, ASF
grooves
4. Disengage the four tabs of the ASF SENSOR, and remove the ASF SENSOR.
DISASSEMBLY & ASSEMBLY
(p106)
ribs
Disassembly/Assembly Procedure (Group 2)
FLAG, DETECTOR, ASF
Figure 4-128. Removing the FLAG, DETECTOR, ASF
ASF SENSOR
Figure 4-129. Removing the ASF SENSOR
Revision A
184