EPSON Stylus Pro 3800/3800C/3850
4.3.9.3 INK, SYSTEM, ASSY.
1.
Remove the HOUSING, UPPER.
2.
Remove the three screws that secure the SHIELD PLATE, HOLDER, ASSY.
Three C.B.S. 3 x 6 screws (9 ± 1 kgf.cm)
3.
Slide the SHIELD PLATE, HOLDER, ASSY. toward the rear to remove the two
tabs on the rear side, and remove the SHIELD PLATE, HOLDER, ASSY.
Insert the two positioning holes of the SHIELD PLATE, HOLDER,
ASSY. over the guide pins of the FRAME, HOLDER, IC, ASSY., to
secure the SHIELD PLATE, HOLDER, ASSY.
FRAME, HOLDER, IC, ASSY.
DISASSEMBLY & ASSEMBLY
(p106)
positioning points
Disassembly/Assembly Procedure (Group 1)
SHIELD PLATE, HOLDER, ASSY.
tabs
C.B.S. 3x6
Figure 4-80. Removing the SHIELD PLATE, HOLDER, ASSY.
Revision A
151