Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 220

EPSON Stylus Pro 3800/3800C/3850
9. Connect a calibrator to the computer, and click [Color Measuring...].
10. Place the calibrator on the calibration base plate, and click [Calibrate].
11. Hold down the button on the side of the calibrator until it beeps. Do not move or
lift the calibrator during pressing the button.
When the calibration is completed normally, the following screen appears
Do not contaminate the white plate on the calibration base plate. If
any dirt is observed on the white plate, wipe it off using alcohol.
ADJUSTMENT
White Plate
Standard Adjustment
Figure 5-40. i1 Calibrator
Figure 5-41. Calibration Screen
Revision A
i1 Calibrator
Button
Base plate
220