Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 136

EPSON Stylus Pro 3800/3800C/3850
† GUIDE, STACKER, RIGHT
1. Install the GUIDE, STACKER, RIGHT so that the two points mentioned below
are securely engaged. See Figure 4-60.
Fig. GUIDE, STACKER, RIGHT
A positioning hole
B positioning hole
2. Slide the GUIDE, STACKER, RIGHT toward the rear of the printer.
Make sure that the cutout of the GUIDE, STACKER, RIGHT is
aligned with the screw hole on the main frame.
GUIDE, STACKER, RIGHT
DISASSEMBLY & ASSEMBLY
Main unit
hook
hook
Disassembly/Assembly Procedure (Group 1)
B
Figure 4-60. Installing the GUIDE, STACKER, RIGHT
Revision A
A
136