Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 141

EPSON Stylus Pro 3800/3800C/3850
REASSEMBLY
1. Slide the FRAME, PAPER, EJECT, ASSY back and forth until the guide holes of the
LINK, EJ, LEFT/RIGHT and GUIDE, PAPER GUIDE, BOARD PAPER, LEFT/
RIGHT come in the positions shown in the
2. Put the pivot of the left of the BOARD PAPER TRAY into the guide holes of the
LINK, EJ, LEFT and GUIDE, PAPER GUIDE, BOARD PAPER, LEFT shown in
the Figure 4-66.
3. Slide the right pivot of the BOARD PAPER TRAY along the guide groove of the
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT shown in the
put the pivot into the guide holes of the LINK, EJ, RIGHT and GUIDE, PAPER
GUIDE, BOARD PAPER, RIGHT shown in the
4. After the above steps, follow step 1. to step 11. of the disassembly procedure in
reverse order to reassemble the BOARD PAPER TRAY.
FRAME, PAPER,
EJECT, ASSY
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
Figure 4-65. Inserting the Right Pivot
DISASSEMBLY & ASSEMBLY
Figure 4-66 and Figure 4-67.
Figure 4-65, and
Figure 4-67.
guide groove
Disassembly/Assembly Procedure (Group 1)
Left side
GUIDE, PAPER GUIDE, BOARD PAPER, LEFT
BOARD PAPER
TRAY
Figure 4-66. Guide holes of the LINK, EJ, LEFT and GUIDE, PAPER GUIDE,
BOARD PAPER, LEFT
Right side
LINK, EJ, RIGHT
guide hole
Figure 4-67. Guide holes of the LINK, EJ, RIGHT and GUIDE, PAPER GUIDE,
BOARD PAPER, RIGHT
Revision A
LINK, EJ, LEFT
guide hole
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
BOARD PAPER
TRAY
guide groove
141