EPSON Stylus Pro 3800/3800C/3850
5.3.19 T&B&S Adjustment
Purpose
Adjusts the position to start printing on the paper.
Paper Used
Size:
A4/Letter
Type:
Enhanced Matte Paper (US)/
Archival Matte Paper (Europe, Asia)
Standard
Margin 5mm
Procedure
1.
Turn the printer ON.
2.
Start up the Adjustment Program and select [T&B&S Adjustment].
3.
Click [Print] to print the adjustment pattern.
4.
Referring to
Figure
5-69, select the numerical value for the position where the
printed line is exactly 5mm away from the paper edge (for each left, right, top,
and bottom sides).
5.
Enter the numerical values found in
6.
Click [Write] and then click [Print] to print the adjustment pattern again.
7.
After confirming that all values are within the specified range, click [Finish].
If they are not, perform
Step 4
Be sure to place the adjustment pattern print on a flat surface when
performing the measurement.
ADJUSTMENT
Step 4
into the corresponding edit boxes.
to
Step 6
again.
Standard Adjustment
Figure 5-68. [T&B&S Adjustment] Screen
Revision A
237