EPSON Stylus Pro 3800/3800C/3850
4.3.9.5 PRINT HEAD
1.
Remove the HOUSING, UPPER.
2.
Remove the COVER, CR.
(p150)
3.
Perform step 13. to step 16. in
"4.3.9.3 INK, SYSTEM, ASSY." (p151)
the SELECTOR, INK, ASSY. from the CARRIAGE, ASSY.
4.
Remove the screw that secures the MOUNTING PLATE, SELECT, INK and
remove it.
See Figure 4-89.
One C.B.P. 2.5 x 8 screw (3 ± 1 kgf.cm)
Insert the rib of the PRINT HEAD into the cutout of the
MOUNTING PLATE, SELECT, INK to secure the MOUNTING
PLATE, SELECT, INK.
5.
Remove the EXTENSION SPRING, 5.63 from each hooked tab on the
CARRIAGE, ASSY. and the LEAF SPRING, LOCK, HEAD.
DISASSEMBLY & ASSEMBLY
(p106)
See Figure 4-90.
Disassembly/Assembly Procedure (Group 1)
positioning point
to remove
C.B.P. 2.5x8
MOUNTING PLATE,SELECT,INK
Figure 4-89. Removing the MOUNTING PLATE, SElECT, INK
CARRIAGE, ASSY.
Figure 4-90. Removing the EXTENSION SPRING, 5.63
hooks
EXTENSION
LEAF SPRING,
SPRING, 5.63
LOCK, HEAD
Revision A
159