Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 138

EPSON Stylus Pro 3800/3800C/3850
4.3.8.2 BOARD PAPER TRAY
DISASSEMBLY
1. Remove the HOUSING, FRONT, LEFT.
2. Remove the HOUSING, FRONT, RIGHT.
3. Remove the STACKER, ASSY.
4. Push out the BOARD PAPER TRAY while pressing in the middle of the BOARD
PAPER TRAY.
5. Release the TORSION SPRING, 0.15 from the SHAFT, PAPER GUIDE,
BOARD PAPER, and loosen the tension of TORSION SPRING, 0.15 (do this
procedure at both sides).
DISASSEMBLY & ASSEMBLY
(p97)
(p98)
(p132)
Disassembly/Assembly Procedure (Group 1)
BOARD PAPER
TRAY
SHAFT, PAPER GUIDE, BOARD
PAPER
TORSION
SPRING, 0.15
Figure 4-62. Removing the TORSION SPRING, 0.15
Revision A
SHAFT, PAPER GUIDE, BOARD
PAPER
TORSION
SPRING, 0.15
138