Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 135

EPSON Stylus Pro 3800/3800C/3850
REASSEMBLY
† GUIDE, STACKER, LEFT
1. Install the GUIDE, STACKER, LEFT so that the two points mentioned below are
securely engaged. See Figure 4-59.
Fig. GUIDE, STACKER, LEFT
A positioning tab
B positioning hole
2. Slide the GUIDE, STACKER, LEFT toward the rear of the printer.
Make sure that the cutout of the GUIDE, STACKER, LEFT is
aligned with the screw hole on the main frame.
DISASSEMBLY & ASSEMBLY
Main unit
positioning hole
hook
GUIDE, STACKER, LEFT
Disassembly/Assembly Procedure (Group 1)
B
Figure 4-59. Installing the GUIDE, STACKER, LEFT
Revision A
A
135