I/S Frame Disassembly (Removing The Pump Motor) - Epson Stylus COLOR 800 Service Manual

3.13.7.1 I/S Frame Disassembly (Removing the Pump Motor)

1. Remove the I/S frame. (See Section 3.13.7.)
2. Remove 2 screws (CBS, 3x6, F/Zn) securing the pump motor. (See Figure 3-62.)
3. Remove 1 hexagon nut (6N, class-2, M4) and 1 draft spring (0.4 g) securing the slider shaft
to the middle sub frame. Then remove the slider shaft. (See Figure 3-63.)
Be careful not to damage the gear (16.8 mm) when removing the hexagon nut (6N, class-2,
M4) securing the slider shaft.
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Figure 3-61. Removing the Screws Securing the Pump Motor
Figure 3-62. Slider Shaft Removal
CAUTION
Disassembly and Assembly
3-47