Canon CLC 1120 Service Manual page 833

CHAPTER 13 TROUBLESHOOTING
Level 1 Level 2
OPTION BODY
USER
Cont'd
13-306
COPYRIGHT © 1999 CANON INC.
COPIER>OPTION Items
Level 3
CCD-DISP
CVR-TYPE
MODEL-SZ
F-WEB
PASCAL
PSCL-MD
EC-GLASS
LPSTCL-ON
METAL
OHP-MODE
COPY-LIM
COUNTER1
COUNTER2
COUNTER3
COUNTER4
COUNTER5
COUNTER6
CONTROL
COLDOFST
MONO-SPD
PRJ-L-SP
Cont'd
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
use it to switch data display on the
DISPLAY>CCD screen (0: normal mode, 1:
precious metal mode)
use it to enter a CVR version (0: normal, 1: new
type)
use it to switch destination (0: AB (6R, 5E), 1:
Inch (5R, 4E), 2: A (3R, 3E), 3: AB/Inch (6R, 5E)
use it to change the frequency of turning on the
fixing cleaning belt (1 through 255; default=1)
use it to switch gradation correction data, contrast
potential obtained by auto gradation correction (0:
disable, 1: enable)
use it to smooth out the gradations on an image
from an external image controller (0: as before, 1:
disable, 2: enable)
use it to select the presence/absence of EC coating
on the copyboard glass (0: absent, 1: present)
use it to switch the post-cleaning charging
mechanism (0: normal, 1: all environments)
use it to turn on/off precious metal mode (0: off, 1:
on, default=0)
use it to select the copy image maximum density
when copying on transparencies (0: Dmax=1.3, 1:
Dmax=1.6, default=0)
use it to change the upper limit on the copy count
(1 to 100)
use it to select a counter type (soft counter 1 on the
control panel of a 120/230-V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 2 on the
control panel of a 120/230-V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 3 on the
control panel of a 120/2300V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 4 on the
control panel of a 20/230-V model) to suit the user
or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 5 on the
control panel) to suit the user or dealer (0: no
counter; 1 through 95)
use it to select a counter type (soft counter 6 on the
control panel) to suit the user or dealer (0: no
counter; 1 to 95)
use it to enable copying, printing, and scanning
without the control key, control card, or ID No.
input.
for R&D
for R&D
use it to prohibit 2-side retention in color copying
mode (other than black mono) with the projector in
use (0: normal, 1: prohibit)