Transfer Drum Assembly; Construction - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
D. Transfer Drum Assembly

1. Construction

[1] Separation claw
[2] Separation charging assembly
[3] Separation push-up roll
[4] Transfer drum
[5] Transfer blade
[6] Attraction roller
[7] Attraction brush
[8] Internal static eliminator
[9] Transfer cleaner push-on brush
[10] Transfer polishing roller
[11] Transfer drum cleaner
[12] External static eliminator
Caution:
The one-way clutch is in operation while
the transfer drum is on the transfer drum
frame. Do not rotate the transfer drum
while keeping your fingers in an opening
of the transfer drum.
The transfer drum, on the other hand,
will rotate in reverse when it is off the
frame. Keep this in mind. (Allowing it to
rotate in reverse can damage the transfer
blade, attraction brush, and transfer
drum side scraper.)
7-88
COPYRIGHT © 1999 CANON INC.
[12] [11]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2] [3] [4]
[9] [8]
[10] [7] [6]
Figure 7-839
[5]