Canon CLC 1120 Service Manual page 536

For the Multifeeder
Turn the screw [1] to move the position of
the tray so that the registration is 2.0 ± 1.5
mm in Direct.
For the Duplexing Unit
Loosen the screw [1], and move the
position of the paper jogging guide so that
the registration is 2.0 ± 1.5 mm in Direct.
b. Adjusting the Attraction Position
(ATTRACT)
1) Select A4.
2) Select ADJUST>FEED-ADJ>ATT-
CHK.
3) Set ATT-CHK to '1' (2-sheet retention;
sides B and A), and press OK.
4) Select ATT-ON, and press OK.
· Copy paper will be picked up,
attracted, and stopped.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
[1]
Figure 13-205
[1]
Figure 13-206
13-9