Removing The Separation Push-Up Roll; Transfer Drum Locking Motor Assembly - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
14. Removing the Separation Push-Up
Roll
1) Remove the transfer drum from the
transfer drum frame.
2) Peel off the transfer sheet.
3) Remove the separation push-up roll [1].
E. Transfer Drum Locking
Motor Assembly (PM5)
1) Slide out the transfer drum frame.
2) Remove the rear cover.
3) Open the CPU PCB.
4) Remove the two screws [1], and
disconnect the two connectors [2]; then,
detach the transfer drum locking motor
assembly.
7-100
COPYRIGHT © 1999 CANON INC.
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 7-872
[1]
[1] [2]
Figure 7-873