Removing The Fixing Upper Thermistor; Removing The Fixing Lower Thermistor - Canon CLC 1120 Service Manual

8. Removing the Fixing Upper
Thermistor
1) Open the front cover.
2) Slide out the transfer drum frame.
3) Remove the two screws, and detach the
fixing upper cover.
4) Remove the screw [1] (one each), and
remove the fixing upper thermistor.
9. Removing the Fixing Lower
Thermistor
1) Open the front cover.
2) Remove the transfer drum frame cover
and the fixing cover.
3) Slide out the transfer drum frame.
4) Remove the fixing assembly unit.
5) Disconnect each connector [1], and
remove the screw [2]; then, detach the
fixing lower thermistor.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 FIXING SYSTEM
[1]
Figure 8-416
[2] [1] [1]
Figure 8-417
[2]
8-19