Canon CLC 1120 Service Manual page 763

CHAPTER 13 TROUBLESHOOTING
Level 1 Level 2
ADJUST ADJ-XY
LASER
13-236
COPYRIGHT © 1999 CANON INC.
COPIER>ADJUST Items
Level 3 Settings
ADJ-X -200 to +200
ADJ-Y -100 to +100
ADJ-S 0 to 32
ADJ-J 0 to 500
T-V00 0 to 255
T-VFF 0 to 255
P3-V00 0 to 255
P3-VFF-1 0 to 255
P3-VFF-2 0 to 255
P3-VFF-3 0 to 255
P3-VFF-4 0 to 255
POWER ---
T-V00-ON ---
T-VFF-ON ---
P3V00-ON ---
P3-V1-ON ---
P3-V2-ON ---
P3-V3-ON ---
P3-V4-ON ---
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
adjusts the image read start position (X
direction; units of 0.1 mm)
adjusts the image read start position (Y
direction; in units of 0.1 mm)
adjusts measurement position for shading
correction from the standard white plate (in
units of 0.1 mm)
adjusts the period of acceleration for the
original scanner motor
enters the laser control initial value at V00
for text mode (800 lines) as for laser unit
replacement
enters the laser control initial value at VFF
for text mode (800 lines) as for laser unit
replacement
enters the laser control initial value at V00
for photo mode (400 lines) as for laser unit
replacement
enters the laser control initial value at VFF
(45%) for photo mode (400 lines) as for laser
unit replacement
enters the laser control initial value at VFF
(55 %) for photo mode (400 lines) as for
laser unit replacement
enters the laser control initial value at VFF
(65%) for photo mode (400 lines) as for laser
unit replacement
enters the laser control initial value at VFF
(70%) for photo mode (400 lines) as for laser
unit replacement
turns on the laser output for laser power
adjustment (OK key to start, Stop key to
stop)
turns on the laser output for a check on T-
V00 (OK key to start, Stop key to stop)
turns on the laser output for a check on T-
VFF (OK key to start, Stop key to stop)
turns on the laser output for a check on P3-
V00 (OK key to start, Stop key to stop)
turns on the laser output for a check on P3-
VFF-1 (OK key to start, Stop key to stop)
turns on the laser output for a check on P3-
VFF-2 (OK key to start, Stop key to stop)
turns on the laser output for a check on P3-
VFF-3 (OK key to start, Stop key to stop)
turns on the laser output for a check on P3-
VFF-4 (OK key to start, Stop key to stop)