Canon CLC 1120 Service Manual page 310

CHAPTER 7 PICK-UP / FEEDING SYSTEM
11) Remove the guide plate [15] from the
guide shaft of the duplexing feed
assembly (both front and rear).
12) Lift the rear of the duplexing feed
assembly [16], and pull it off.
4. Adjusting the Left/Right
Registration of the Duplexing Unit
1) Slide out the duplexing, and open the
duplexing feeding assembly.
2) Loosen the two screws [1].
7-68
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[15]
Figure 7-753
[16]
Figure 7-754
[1]
Figure 7-755