Canon CLC 1120 Service Manual page 553

CHAPTER 13 TROUBLESHOOTING
7) While keeping the leading edge of the
transfer drum sheet against the transfer
drum and stroking it as if to push the
trailing edge over the leading edge, attach
the transfer drum sheet from center to
both sides.
Caution:
Be sure that there is no warping or
slacking at the center of the transfer
drum sheet. Warping, if any, will cause
the transfer drum sheet to come into
contact with the photosensitive drum,
leading to caking of toner on the
photosensitive drum and, as a result,
photosensitive drum cleaning faults.
8) Smooth over the adhesive tape of the
transfer drum sheet so that the sheet will
be in firm contact with the transfer drum.
9) Check the transfer drum sheet for warping
and slacking.
10) Slide the transfer drum frame into the
copier.
13-26
COPYRIGHT © 1999 CANON INC.
(direction of rotation)
1 3
2
Figure 13-244 Correct Way of
Attaching the Transfer Drum Sheet
Figure 13-245 Incorrect Way of
Attaching the Sheet
Figure 13-246 Incorrect Way of
Attaching the Sheet
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 13-243
3 1
Leading edge of sheet
Trailing edge of sheet