Canon CLC 1120 Service Manual page 294

CHAPTER 7 PICK-UP / FEEDING SYSTEM
5) Remove the two screws [5], and detach
the separation roller support mount [6].
6) Remove the separation roller [7].
Caution:
a. When mounting the feed roller [1] to
the pickup assembly, be sure that the
gear [2] attached to the feed roller is
at the front of the copier.
b. When mounting the separation roller
[1] to the pickup assembly, be sure
that the round marking [2] is at the
front as shown.
7-52
COPYRIGHT © 1999 CANON INC.
[5]
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6] [5]
Figure 7-708
[7]
Figure 7-709
[1]
[1]
Figure 7-710
[2]