User Mode - Canon CLC 1120 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
C. User Mode
Mode
Custom Standard Key Settings
Settings
Standard Display window
Energy Saver Adjustment
Inch Entry
Confirmation window
Auto Display
Auto sort
Drawer Eligibility for
APS / ADS
Audible Tones
off)
Exposure Level Switch
Transparency Feed
Location
Thin Paper Feed
Location
Color Sheet Change
Feeder Auto Start
Standard Settings change
System Settings Password
Department ID
Management
Custom Settings
Initialization
* : default.
1-14
COPYRIGHT © 1999 CANON INC.
Use it to register a preference key to be
displayed on the Standard screen. (none*)
Use it to select the screen to be displayed at power-on.
(none*, extension mode, mode memory, call)
Use it to select an energy saving level. (-10%, -25%, -50%,
non-recovery, in which control panel indicators are turned
off)
Use it to enable input in inches. (on/off*)
Use it to enable/disable displaying the Settings Check key.
(enable/disable*)
Use it to enable/disable sorting of a single original. (on*/off)
Use it to enable/disable continuing copying operation by
switching cassettes when the selected cassette runs out of
paper (to one holding the same size paper). (on*/off)
Use it to enable/disable input, alarm, and end sounds. (on*/
Use it to select the number of steps used to select copy
density for the Copy Density key. (9 steps*/17 steps)
Use it to select a cassette exclusively for transparencies.
Use it to select a cassette exclusively for think paper (64 to
2
79 g/m ).
Use it to register color sheet printing and colors.
Use it to enable/disable automatic copying as soon as copy
paper is placed on the manual feeder or the feeder.
Use it to register or initialize standard mode.
Use it to register an ID No. for system control. (4 digits)
Use it to enable/disable ID control by group, or register
and count-control by group ID (4 digits).
Use it to initialize settings to factory settings.
Table 1-402a
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description