Canon CLC 1120 Service Manual page 239

13) Remove the four screws [16], and detach
the developing drive assembly [17].
Caution:
Take care not to hit the gear [18] on the
drum shaft.
14) Disconnect the three connectors [19]
found on the top of the multifeeder
assembly.
15) Pull off the three pins [20] at the top, and
shift the partition sheet [21] in the
direction of the arrow.
16) Remove the transfer assembly frame
from the copier.
17) Remove the two screws [22], and remove
the toner receptacle [23].
18) Remove the screw [24], and detach the
face cover [25].
19) Remove the two screws [26], detach the
two positioning pins [27].
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[17]
[16]
[15]
Figure 6-688
[20]
[21]
Figure 6-689
[22]
[21]
[26]
[27] [24]
Figure 6-690
[18]
[16]
[19]
[19]
[26]
[27]
[23]
6-87