Canon CLC 1120 Service Manual page 780

DOC-REC
FEED-ADJ
Cont'd
COPYRIGHT © 1999 CANON INC.
DX-XS -99 to +99
DA-XE -99 to +99
DA-YS -99 to +99
DA-YE -99 to +99
DS-DOC 0 to 31
ATT-T-A -10 to +10
ATT-T-B -10 to +10
RG-XA -47 to +47
RG-XB -47 to +47
RG-Y -70 to +70
TR-DLY-A -10 to +10
TR-DLY-B -10 to +10
ATT-CHK 1 to 3
ATT-ON ---
RGST-CHK 1 to 3
RGST-ON ---
TR1-CHK 1 to 3
TR2-CHK 1 to 3
TR1-ON ---
TR2-ON ---
TR3-ON ---
TR4-ON ---
Cont'd
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
fine-adjustment of the original detection area
fine-adjustment of the original detection area
fine-adjustment of the original detection area
fine-adjustment of the original detection area
adjustment of the slice level for original
detection
adjustment of side A attraction timing for the
transfer drum
adjustment of side B attraction timing for the
transfer drum
adjustment of registration in sub scanning
direction of side A on the transfer drum
adjustment of registration in sub scanning
direction of side B on the transfer drum
adjustment of registration in main scanning
direction on the transfer drum
adjustment of position of attraction of side A
on the transfer drum
adjustment of position of attraction of side B
on the transfer drum
specification of position of attraction on the
transfer drum during ATT-ON (1: 2-sheet
retention of sides B and A; 2: retention on
side A, 3: retention on side B)
executes attraction of copy paper to the
transfer drum according to ATTCHK (OK
key to start; auto stop)
specifies position of attraction on the transfer
drum during RGST-ON (1: 2-sheet retention
on sides B and A, 2: retention on side A, 3:
retention on side B)
executes printing for checking registration
(retention side) using C according to RGST-
CHK (OK key to start; auto stop)
specifies position of attraction on the transfer
drum during TR1-ON (1: 2-sheet retention of
sides B and A, 2: retention on side A, 3:
retention on side B)
specifies position of attraction on the transfer
drum during TR2-ON (1: 2-sheet retention of
sides B and A, 2: retention on side A, 3:
retention on side B)
executes printing for checking the leading
edge margin (1 mm) according to TR1-CHK
(OK key to start; auto stop)
executes printing for checking the leading
edge margin (8 mm) according to TR2-CHK
(OK key to start; auto stop)
executes printing for checking a training edge
margin according to TR-END-A (OK key to
start; auto stop)
executes printing for checking a training edge
margin according to TR-END-B (OK key to
start; auto stop)
13-253