Show Authentication - Cisco WS-C6506 Software Manual

Catalyst 6500 series switch

Hide thumbs Also See for WS-C6506:

Manual (110 pages)

Installation manual (336 pages)

Table of Contents

Configuring Authentication on the Switch

attempt limit

lockout timeout (sec)

Enable Authentication: Console Session

---------------------- ----------------- ----------------

attempt limit

lockout timeout (sec)

* Local User Authentication enabled.

Console> (enable)

Disabling Local User Authentication

To disable local user authentication on the switch, perform this task in privileged mode:

Disable local user authentication.

Verify the local authentication configuration.

This example shows how to disable local user authentication for the switch and how to verify the

configuration:

Console> (enable) set localuser authentication disable

local user authentication set to disable.

Console> (enable) show authentication

---------------------

attempt limit

lockout timeout (sec)

Enable Authentication: Console Session

---------------------- ----------------- ----------------

attempt limit

lockout timeout (sec)

* Local User Authentication disabled.

Console> (enable)

Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7

enabled(primary)

enabled(primary)

Console Session

----------------

enabled(primary)

enabled(primary)

Configuring the Switch Access Using AAA

enabled(primary)

Telnet Session

Http Session

----------------

enabled(primary)

set localuser authentication disable