Configuring Ieee 802.3Ah Ethernet Oam; Understanding How Oam Works - Cisco WS-C6506 Software Manual

Configuring IEEE 802.3ah Ethernet OAM

•
Enter the show errordetection command to display information about the error-detection configuration.
Note
Configuring IEEE 802.3ah Ethernet OAM
The Ethernet Operations, Administrations, and Maintenance (OAM) feature follows the specifications
provided in the IEEE 802.3ah document. The major Ethernet OAM features covered by this protocol are
link monitoring, remote failure indication, and a remote loopback test.
We do not support remote failure indication.
Note
This section describes how to configure IEEE 802.3ah Ethernet OAM:
•
•
•

Understanding How OAM Works

In the Open Systems Interconnection (OSI) reference model, Ethernet OAM is an optional sublayer that is
implemented in the data link layer between the logical link control (LLC) and MAC sublayers (see
Figure
Figure 20-1
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
20-26
set errordetection link-errors sampling {sampling_count}
To minimize accidentally putting a port into the errdisable state due to a one-time event that is not
a true system error condition, you can specify a sampling_count. The sampling_count determines
the number of times that a port must reach the high or low threshold value before the port is placed
in the errdisable state. For example, if the port's high threshold value is 1000 and the sampling count
is 3, the port is errdisabled only after it has reached the 1000 threshold 3 times. The default sampling
count value is 3, and the allowed range is from 1 to 255.
Understanding How OAM Works, page 20-26
Ethernet OAM Configuration Guidelines and Restrictions, page 20-27
Executing Ethernet OAM, page 20-27
20-1).
Position of Ethernet OAM in the OSI Reference Model
Application
Presentation
Session
Transport
Network
Data Link
Physical
Chapter 20
LLC Logical Link Control (or other MAC Client)
-------------------------------------------------------------
OAM (optional)
-------------------------------------------------------------
MAC Control (optional)
-------------------------------------------------------------
MAC-Media Access Control
Checking Status and Connectivity
OL-8978-04