Cisco WS-C6506 Software Manual page 1407

Chapter 55 Configuring a VoIP Network
This example shows how to display the FDL statistics for the specified ports:
Console> (enable) show port voice fdl 7/1-3
Port
----- -------- -------- -------- -------- -------- -----------
7/1
7/2
7/3
Port
----- -------- -------- -------- ---------
7/1
7/2
7/3
Port
----- -------- -------- -------- -------- -------- --------
7/1
7/2
7/3
Console> (enable)
Table 55-7
command output.
Table 55-7
Field
ErrorEvents
ErroredSecond
SeverelyErroredSecond
FailedSignalState
FailedSignalSecond
LES
BES
LCV
Displaying the Port Configuration for the Individual Ports
To display the port configuration for the individual ports, perform this task in normal mode:
Task
Display the port configuration for the individual
ports.
OL-8978-04
ErrorEvents ErroredSecond
Last 15' Last 24h Last 15' Last 24h Last 15' Last 24h
17 18 19
17 18 19
17 18 19
FailedSignalState FailedSignalSecond
Last 15' Last 24h Last 15' Last 24h
37 38 39
37 38 39
37 38 39
LES
Last 15' Last 24h Last 15' Last 24h Last 15' Last 24h
41 48 49
41 48 49
41 48 49
describes the possible fields (depending on the port type queried) in the show port voice fdl
FDL Field Descriptions
Description
Count of errored events.
Count of errored seconds.
Count of severely errored seconds.
Count of failed signal state errors.
Count of errored events.
Line errored seconds detected.
Bursty errored seconds detected.
Line code violation seconds detected.
SeverlyErroredSecond
20 21 22
20 21 22
20 21 22
40
40
40
BES LCV
50 53 54
50 53 54
50 53 54
Command
show port [mod[/port]]
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring VoIP on a Switch
55-25