Cisco WS-C6506 Software Manual page 798

Downloading the Software Images Using FTP or TFTP
Leaving power_on_diags
Cafe Daughter Present.
EOBC link up
Boot image: bootflash:cat6000-sup2k8.7-7-1.bin,1
Flash Size = 0X1000000, num_flash_sectors = 64
readCafe2Version: 0x00000001
RIn Local Test Mode, Pinnacle Synch Retries: 2
Running System Diagnostics from this Supervisor (Module 1)
This may take up to 2 minutes....please wait
Cisco Systems Console
Enter password:
07/21/1998,13:52:51:SYS-5:Module 1 is online
07/21/1998,13:53:11:SYS-5:Module 4 is online
07/21/1998,13:53:11:SYS-5:Module 5 is online
07/21/1998,13:53:14:PAGP-5:Port 1/1 joined bridge port 1/1.
07/21/1998,13:53:14:PAGP-5:Port 1/2 joined bridge port 1/2.
07/21/1998,13:53:40:SYS-5:Module 2 is online
07/21/1998,13:53:45:SYS-5:Module 3 is online
Console>
Single Module Image Download Example
For a procedure on downloading the software images to the intelligent modules, see the
Note
the Switching Module Images Using FTP or TFTP" section on page
This example shows a complete TFTP download procedure of an ATM software image to a single ATM
module:
Console> (enable) show version 4
Mod Port Model
--- ---- ---------- --------- ----------------------------------------
4
Console> (enable) copy tftp 4/flash
IP address or name of remote host []? 172.20.52.3
Name of file to copy from []? cat6000-atm.3-2-7.bin
Download image tftp:cat6000-atm.3-2-7.bin to Module 4 FLASH (y/n) [n]? y
This command will reset Download Module(s) you selected.
Do you wish to continue download flash (y/n) [n]? y
-
Download done for module 4, please wait for it to come online
File has been copied successfully.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
27-12
Serial #
1 WS-X6101 003414855 Hw : 1.2
Versions
Fw : 1.3
Sw : 3.2(6)
Chapter 27 Working with System Software Images
27-8.
"Downloading
OL-8978-04