Show Commands - Cisco WS-C6506 Software Manual

Chapter 15 Configuring Access Control

show Commands

To display all the PBF maps, perform this task in normal mode:
Task
Display all the PBF maps.
This example shows how to display all the PBF maps:
Console> (enable) show pbf-map
PBF MAP
Clients
---------------------------------------------
cl1
Console> (enable)
To display the PBF client configuration, perform this task in normal mode:
Task
Display the PBF client configuration.
This example shows how to display the PBF client configuration:
Console> (enable) show pbf client
Client
Map
VLAN
Adjacency
------------------------------------------
.c0001cl1
Console> (enable)
To display the PBF-gateway configuration, perform this task in normal mode:
Task
Display the PBF-gateway configuration. show pbf gw [gw_name | ip_addr]
This example shows how to display the PBF-gateway configuration:
Console> (enable) show pbf gw
Client
Map
VLAN
Adjacency
----------------------------------------------------------------
.g0002gw1
Console> (enable)
OL-8978-04
Gatways
gw1
: cl1
: gw1
: 101
ip mac
21.1.1.1 00-00-00-00-40-01
: gw1
: cl1
: 102
ip mask
21.0.0.128 255.0.0.0
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Command
show pbf-map
Command
show pbf client [client_name | ip_addr]
Command
mac
00-a0-c9-81-e1-13
Configuring Policy-Based Forwarding
15-109